Rogue Surge

What I need from the box:

1. NAS with CIFS
2. Media Streaming Server (Xbox360, PS3, iPad)
3. Sabnzb, SickBeard and CouchPotato
4.  Transmission
5. OpenVpn Server/Client
6. WebServer PHP,MySQL, pgSQL, CGI

Box Specs:

• CPU Core2 Duo
• MoBo Intel DG33Lt
• 8GB DDR2 800
• 4×1.5TB WD HDD in RAID 10 2.7 TB effective storage, not bootable
• 120GB Toshiba HDD

To configure an internal time server to synchronize with an external time source, follow these steps:

1. Change the server type to NTP. To do this, follow these steps:
   1. Click Start, click Run, type regedit, and then click OK.
   2. Locate and then click the following registry subkey:
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters\Type
   3. In the right pane, right-click Type, and then click Modify.
   4. In Edit Value, type NTP in the Value data box, and then click OK.
2. Set
   AnnounceFlags

   to 5. To do this, follow these steps:

   1. Locate and then click the following registry subkey:
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\AnnounceFlags
   2. In the right pane, right-click AnnounceFlags, and then click Modify.
   3. In Edit DWORD Value, type 5 in the Value data box, and then click OK.Notes
      • If an authoritative time server that is configured to use an AnnounceFlag value of 0×5 does not synchronize with an upstream time server, a client server may not correctly synchronize with the authoritative time server when the time synchronization between the authoritative time server and the upstream time server resumes. Therefore, if you have a poor network connection or other concerns that may cause time synchronization failure of the authoritative server to an upstream server, set the AnnounceFlag value to 0xA instead of to 0×5.
      • If an authoritative time server that is configured to use an AnnounceFlag value of 0×5 and to synchronize with an upstream time server at a fixed interval that is specified in SpecialPollInterval, a client server may not correctly synchronize with the authoritative time server after the authoritative time server restarts. Therefore, if you configure your authoritative time server to synchronize with an upstream NTP server at a fixed interval that is specified in SpecialPollInterval, set the AnnounceFlag value to 0xA instead of 0×5.
3. Enable NTPServer. To do this, follow these steps:
   1. Locate and then click the following registry subkey:
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpServer
   2. In the right pane, right-click Enabled, and then click Modify.
   3. In Edit DWORD Value, type 1 in the Value data box, and then click OK.
4. Specify the time sources. To do this, follow these steps:
   1. Locate and then click the following registry subkey:
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters
   2. In the right pane, right-click NtpServer, and then click Modify.
   3. In Edit Value, type Peers in the Value data box, and then click OK
      • us.pool.ntp.org,0×01 time.microsoft.com,0×01

      
      Note Peers is a placeholder for a space-delimited list of peers from which your computer obtains time stamps. Each DNS name that is listed must be unique. You must append ,0×01 to the end of each DNS name. If you do not append ,0×1 to the end of each DNS name, the changes made in step 5 will not take effect.

5. Select the poll interval. To do this, follow these steps:
   1. Locate and then click the following registry subkey:
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpClient\SpecialPollInterval
   2. In the right pane, right-click SpecialPollInterval, and then click Modify.
   3. In Edit DWORD Value, type TimeInSeconds in the Value data box, and then click OK.Note TimeInSeconds is a placeholder for the number of seconds that you want between each poll. A recommended value is 900 Decimal. This value configures the Time Server to poll every 15 minutes.
6. Configure the time correction settings. To do this, follow these steps:
   1. Locate and then click the following registry subkey:
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\MaxPosPhaseCorrection
   2. In the right pane, right-click MaxPosPhaseCorrection, and then click Modify.
   3. In Edit DWORD Value, click to select Decimal in the Base box.
   4. In Edit DWORD Value, type TimeInSeconds in the Value data box, and then click OK.Note TimeInSeconds is a placeholder for a reasonable value, such as 1 hour (3600) or 30 minutes (1800). The value that you select will depend upon the poll interval, network condition, and external time source.
   5. Locate and then click the following registry subkey:
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\MaxNegPhaseCorrection
   6. In the right pane, right-click MaxNegPhaseCorrection, and then click Modify.
   7. In Edit DWORD Value, click to select Decimal in the Base box.
   8. In Edit DWORD Value, type TimeInSeconds in the Value data box, and then click OK.Note TimeInSeconds is a placeholder for a reasonable value, such as 1 hour (3600) or 30 minutes (1800). The value that you select will depend upon the poll interval, network condition, and external time source.
7. Quit Registry Editor.
8. At the command prompt, type the following command to restart the Windows Time service, and then press ENTER:
   net stop w32time && net start w32time

Http://lifehacker.com/5890139/how-to-create-a-custom-theme-for-your-wordpress-blog-with-minimal-coding-required

Welcome to WordPress. This is your first post. Edit or delete it, then start blogging!

[gview file="http://download.deccats.com/New_Product_Announcements/New_Product_Announcement_12-5-2011.pdf"]

Nulla sagittis convallis arcu. Sed sed nunc. Curabitur consequat. Quisque metus enim, venenatis fermentum, mollis in, porta et, nibh. Duis vulputate elit in elit. Mauris dictum libero id justo. Fusce in est. Sed nec diam. Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Quisque semper nibh eget nibh. Sed tempor. Fusce erat.

An Ordered List

1. Vestibulum in mauris semper tortor interdum ultrices.
2. Sed vel lorem et justo laoreet bibendum. Donec dictum.
3. Etiam massa libero, lacinia at, commodo in, tincidunt a, purus.
4. Praesent volutpat eros quis enim blandit tincidunt.
5. Aenean eu libero nec lectus ultricies laoreet. Donec rutrum, nisi vel egestas ultrices, ipsum urna sagittis libero, vitae vestibulum dui dolor vel velit.

Welcome to WordPress. This is your first post. Edit or delete it, then start blogging!